Specifications

2-8 Troubleshooting
File Menu
Begin here To do this
System information
■ View identification information about the
computer, docking base, and battery packs.
■ View specification information about the
processor, memory and cache size, and ROM
date and family.
Save to floppy Save system configuration to a diskette.
Restore from floppy Restore system configuration from a diskette. (The
diskette contains your personal configuration, so
you should restore from the diskette before using
the System Recovery CD-ROM.)
Restore defaults Replace configuration settings in Computer Setup
with factory default settings. (Identification
information is retained.)
Ignore changes and exit Cancel changes entered during the current
Computer Setup session, then exit and restart the
computer.
Save changes and exit Save changes, then exit and restart the computer.
Security Menu
Begin here To do this
Setup password Enter, change, or delete a setup password.
Power-On password Enter, change, or delete a power-on password.
Password options Enable/disable:
■ QuickLock/QuickBlank.
■ Lock keyboard and pointing stick or touchpad at
startup.
(These features can be enabled only when a
power-on password is set.)
DriveLock passwords Enter, change, or delete a DriveLock password.
Device security Enable/disable
■ Ports or diskette drives.
■ Diskette write.
■ CD-ROM or diskette startup.
NOTE: Settings for a DVD-ROM can be entered in
the CD-ROM field.
System IDs Enter identification numbers for the computer, a
docking base, and battery packs.