Specifications

5-30 Removal and Replacement Procedures
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: David Calvert Saved by: The Integrity Group Saved date: 09/12/00 3:47 PM
Part Number: 128679-005 File name: Ch05
5.15 System Board
IMPORTANT: When replacing the system board, remove the voltage
converter board and retain it for use on the new system board. A new
voltage converter board is not shipped with the new system board.
Refer to Section 5.16 for voltage converter board removal procedures.
System Board
Spare Part Number Information
Armada E500 only
(all with 64 MB SDRAM)
Intel Pentium III 700-MHz processor 190804-001
used only with config. codes beginning with
“DX,” “FFH,” “FMX,” “FMZ,” and “FWZ”
Intel Pentium III 650-MHz processor 177751-001
used only with config. codes beginning with
“DPB” and config. codes “FFD5” through
“FFD8”
Intel Pentium III 600-MHz processor 177750-001
used only with config. codes beginning with
“DN9” and config. codes “FFD1” through
“FFD4,” “FL51” through “FL63,” and “FVY1”
through “FVY4”
Intel Pentium III 500-MHz processor 165102-001
used only with config. codes beginning with
“DNM”, “DNN”, and “DVM”, and config.
code “DN83”
Intel Pentium III 450-MHz processor 165101-001
used only with config. codes beginning with
“CZQ” and config. codes “DN84” and
“DN85”
Intel Pentium II 400-MHz processor 159528-001
used only with config. codes beginning with
“DC” and config. codes “DN81” and “DN82”
Intel Pentium II 366-MHz processor 159527-001
used only with config. codes beginning
with “DJC”
Intel Celeron 550-MHz processor 200397-001
used only with config. codes beginning
with “FVX,” “FVZ,” and “FWB”
C ontinued