Operation Manual

8-4 Connecting External Devices
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: KMosby Saved by: Jessica Gilbert Saved date: 08/13/98 1:05 PM
Part Number: 316216-002 File name: ch08.doc
7. Slide the power switch
3 on the computer, or press the power
button on the convenience base.
Docking the computer
Undocking the Computer from the
Convenience Base
The undocking process depends on your operating system. To
undock your computer from the optional convenience base:
1. From the Windows 95 or Windows 98 start menu, click Start
Æ Eject PC. The computer will initiate Suspend and you can
safely undock the computer. If you are using Windows NT,
Shut Down the computer by clicking Start Æ Shut Down.
CAUTION:
Failure to use the ejection procedure may cause
loss of data or unpredictable results.
NOTE:
Not all network operating systems support "hot
docking" (while the computer is on).
2. Close the display if not already closed.
NOTE:
Disconnect the PC Card cable and unlock the security
cable, if applicable, to prevent damage.
3. Pull the docking lever fully forward to undock the computer.