Operation Manual

7-16 Using the Internal Modem

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Writer: KMosby Saved by: Jessica Gilbert Saved date: 08/13/98 10:44 AM

Part Number: 316216-002 File name: ch07.doc

Modifying an S Register

The correct command format for modifying an S Register is

ATSn=r, where n is the register number to be modified and r is the

value to which you wish to set the register. For example, to set

ATS37=7<cr>

The register S37 is now set to a value of 7.

Reading an S Register

Entering the ATSn? command allows you to read the contents of a

given S register. For example, to display the contents of the S11

ATS11?

S Register Command Summary

S0 Automatic Answer.

S1 Ring Counter.

S2 AT Escape Character.

S3 Command Line Termination Character.

S4 Response Formatting Character.

S5 Command Line Editing Character.

S6 Pause Before Blind Dialing.

S7 Connection Completion Timeout.

S8 Comma Dial Modifier Time.

S10 Automatic Disconnect Delay.

S11 DTMF Dialing Speed.

S12 Escape Code Guard Time.

S28 V.34 Modulation.

S30 Inactivity Timer.

S32 Synthetic Ring Volume.

S33 Synthesized Ring Frequency.

S35 Data Calling Tone.

S37 Dial Line Rate.

S38 56K Dial Line Rate.

S42 Auto Rate. (default 1, range 0-1)