Operation Manual

Using the Internal Modem 7-15
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: KMosby Saved by: Jessica Gilbert Saved date: 08/13/98 10:44 AM
Part Number: 316216-002 File name: ch07.doc
Fax Commands
Command Description
+FTM=n Transmit Data.
+FRM=n Receive Data.
+FTH=n Transmit Data with HDLC Framing.
+FRH=n Receive Data with HDLC Framing.
Dial Modifiers
These commands may be used with the ATD command to dial
telephone numbers.
Dial Modifiers
Modifier Description
L Redial Last Number.
P Pulse Dialing.
S=n Dial Stored Number.
T Tone Dialing.
W Wait for Dial Tone.
; (semicolon) Return to Command Mode.
@ (at character) Wait for Quiet Answer Command.
! (exclamation) Flash Hook Command.
, (comma) Pause During Dialing.
$ (bong detect) Wait for calling card tone.
^ (carat) Disable Data Calling Tone Transmission.
> (greater than) Ground Start Dialing.
0 through 9 Dial Digits. Valid digits for pulse or tone dialing.
A, B, C, D, #, * Dial Characters.
S Register Default Values
The S register default values are set to function appropriately
under most circumstances. However, their values may be modified
if necessary. For example, it may take an especially long time to
get a dial tone in your office, so you may choose to reset S6 for a
longer wait time.