Troubleshooting guide

Removing the CPU Cover
To remove the CPU cover for replacement, follow these steps.
1. Remove the keyboard assembly from the computer. Refer to "Removing the
Keyboard Assembly" in this section.
2. Turn the keyboard assembly topside down.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Note the position of the screws removed from the bottom of the keyboard
assembly. The remaining screws holes are for the screws that go through the
keyboard assembly to the CPU base.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
3. Remove the seven screws on the bottom of the keyboard assembly (Figure
5-19).
IMPORTANT: There is a light deflector located in the status panel. When
removing the CPU cover from the keyboard, the light deflector
will come loose. Be sure to replace it in the status panel when
replacing the CPU cover to the keyboard.
4. Separate the CPU cover from the keyboard (Figure 5-19).