Setup guide

17
Compaq ships an AGP board in their standard configuration. The
AGP and TARGA 2000 video board set need to be removed when
upgrading to NewsCutter Release 2.x. Avid does not use the AGP slot.
Slots 1 to 4 are 32-bit PCI slots. Figure 2 identifies the slots for both
releases.
c
If you are using an optional SDTI board, you need to install an
Ultra 160 LVD SCSI controller.
Figure 2 Compaq Professional Workstation AP500 —
Rear View
NewsCutter Release 1. x
Edit display
controller board
Digital media
board set
AGP slot
TARGA 2000
video board
Slot 4
Slot 1
Onboard SCSI
connector
Slot 4
Slot 1
NewsCutter Release 2. x
Onboard SCSI
connector
0474101A.fm Page 17 Thursday, December 14, 2000 4:25 PM