Service manual

3-4 Service Manual
3.2 Show Configuration Display
The show configuration console command is useful to obtain more
information about the system configuration, in case you need to
replace a module.
Example 3–2 Show Configuration Sample
P00>>> show configuration
Name Type Rev Mnemonic
TLSB
0++ KN7CG-AB 8025 0000 kn7cg-ab0
➊
6+ MS7CC 5000 0000 ms7cc0
7+ KFTHA 2020 0000 kftha0
8+ KFTHA 2000 0000 kftha1
C0 PCI connected to kftha0 pci0
➋
0+ SIO 4828086 0003 sio0 ➌
7+ KZPSA 8101 0000 kzpsa0 ➍
8+ ISP1020 8101 0000 kzpsa1
A+ DAC960 11069 0000 dac0
➎
Controllers on SIO sio0 ➏
0+ DECchip 21040-AA 21011 0000 tulip0
1+ FLOPPY 2 0000 floppy0
2+ KBD 3 0000 kbd0
3+ MOUSE 4 0000 mouse0
P00>>>
➊
The first grouping shows the modules on the TLSB bus and their status.
In this example, the processor is in slot 0, as shown in the console display
of system self-test. A memory is at node 6, and KFTHA modules at
nodes 7 and 8.
➋
C0 is next, showing the PCI bus on the KFTHA module.