Service manual

B-2 Service Manual
Table B–1 Summary of Console Commands (Continued)
Command Description
bu[ild] –n <device>
Initialize the CPU’s nonvolatile RAM.
<device> — KN7CG- AA
bu[ild] –s <device>
Initialize a module’s serial EEPROM.
<device> — MS7CC, KFTHA, or DWLPB.
cl[ear]ee[prom]<option>
Clears the selected EEPROM option.
<option>— diag_sdd, diag_tdd,
symptom, or log.
cl[ear] <envar>
Removes an environment variable.
<envar> — name of the environment
variable.
cl[ear] screen
Clears the terminal screen.
<device> — KN7CG- AA
c[ontinue]
Resumes processing at the point where it
was interrupted by Ctrl/P.
cra[sh]
Causes the operating system to restart and
generates a memory dump.
cre[ate]<envar>[<value>]
Creates an environment variable.
<envar> — name of the environment
variable.
<value> — optional variable value.
da[te][<yyyymmddhhmm.ss>]
Sets or displays the system date and time.
yyyy — year; mm — month; dd — day;
hh — hour; mm — minutes; ss — seconds
d[eposit][-{b,w,l,q,o,h}][-{n val,
s val}][space:]<address>
<data>
Stores data in the specified location.
space — device name or address space of
the device to access.
<address> — offset within a device to
which data is deposited.
e[xamine][-{b,w,l,q,o,h}][-{n
val, s val}][space:]<address>
Provides information on console commands.
i[nitialize]
Performs a reset.