Service manual

Console Commands and Environment Variables B-1
Appendix B
Console Commands and
Environment Variables
B.1 Console Commands
Table B-1 is a summary of the console commands, showing syntax and
brief descriptions. For additional information, see the Operations
Manual.
Table B–1 Summary of Console Commands
Command Description
b[oot][-flags M,PPPP][-file
<filename>]<device_name>
Boot the operating system.
–fl[ags]—overrides the boot_osflags
environment variable.
M — specifies the system root to be booted
from the system disk.
PPPP — operating system bootstrap loader
options.
–file — boot from the file <filename>
(overrides the boot_file environment
variable).
bu[ild] –c <device>
Copy the EEPROM environment variables
from a secondary processor to the primary
processor.
<device> — KN7CG- AA
bu[ild] –e <device>
Initialize a module’s EEPROM.
<device> — KN7CG- AA