Service manual

Service Manual
A-6
A.3 Update
The update command writes new firmware from the CD-ROM to the
module. Then LFU automatically verifies the update by reading the
new firmware image from the module into memory and comparing it
with the CD-ROM image.
Example A–3 Update Command
UPD> update kn7cg-ab0 ➊
WARNING: updates may take several minutes to complete for each device.
Confirm update on: kn7cg-ab0_arc [Y/(N)] y
➋
DO NOT ABORT!
kn7cg-ab0_arc Updating to V5.68-0 .Verifying V5.68-0 Passed
Confirm update on: kn7cg-ab0 [Y/(N)] y
➋
DO NOT ABORT!
kn7cg-ab0 Updating to V5.5-12... Verifying V5.5-12... Passed.
➌
UPD> update kzpsa0 ➍
WARNING: updates may take several minutes to complete for each device.
Confirm update on: kzpsa0 [Y/(N)] y
DO NOT ABORT!
kzpsa0 Updating to A10... FAILED.
➎
UPD> exit
Errors occurred during update with the following devices:
kzpsa0
Do you want to continue to exit?
Continue [Y/(N)]y
Initializing...
[self-test display appears]