Installation guide

2-24 Getting Started with Logical Partitions
2.10 Moving One Floppy Drive Between Partitions
(GS140 Only – Optional)
This section tells how to move a single floppy from one partition to an-
other on GS140 systems, to run RCU for each partition, for example,
when you have only one floppy drive in your configuration.
2.10.1 Moving a Floppy Drive on a GS140 System
Figure 2–14 Relevant Connectors on KFE72s and DWLPBs for the
GS140
48V power
connectors
Hose
DWLPB
Front panel slot 2 1 0
Floppy
power
Floppy
signal
port
KFE72
Floppy power
and signal ports
BX-0183J-99
KFE72-DA
Adapter