Installation guide

2-20 Getting Started with Logical Partitions
2.8 CD-ROM Drives for Partitions
On a GS140 system, the CD-ROM drive for partition 0 is located near
the control panel on the front of the machine. You may install
RRD43/44/45/46/47-VA CD-ROM drives for each secondary partition in
the rightmost shelf at the front of either the main cabinet or the ex-
pander cabinet. On a GS60E system, the CD-ROM drive for partition 0
is located at the front of the system below the fan. You can install a
second CD-ROM drive for the secondary partition below the first one.
Figure 2–11 Placement of RRD4x-VA Drives on a GS140 System
BX-0183H-99
Main Cabinet (Front)
BA35x-FA
Personality Card
RRD4x Drives
for Secondary
Partitions
CD-ROM for
Partition 0
Floppy for
Partition 0
(optional)