Installation guide

Configuration
Rules
2-3
Table 2–1 lists the minimum requirements and maximum restrictions for three
logical partitions; Table 2–2, for two partitions.
Table 2–2 Requirements for a Two-Partition System (GS140 or GS60E)
Partition 0 Partition 1
Min Max Min Max
CPU modules
1
1
5² (for GS140)
or
2² (for GS60E)
1
5² (for GS140)
or
2² (for GS60E)
Memory module
size
512
Mbyte
4 Gbyte 512 Mbyte 4 Gbyte
Memory modules
2
1
5 (for GS140)
or
2 (for GS60E)
1
5 (for GS140)
or
2 (for GS60E)
I/O modules² 1 2 1 2
DWLPB
3
18 1 8
KFE72-EA/LA 0 1 N/A N/A
KFE72-DA N/A N/A 1 1
BA35x
4
1 See footnote 4 1 See footnote 4
Disk Drives
5
2 See footnote 5 2 See footnote 5
RRD4x CD-ROMs 1 N/A 1 N/A
Floppy
6
01 N/AN/A
1
Logical partitions support KN7CG (GS60E/GS140) processors only.
2
The total number of modules connected to the TLSB must not exceed 9 (CPU, I/O, and
memory) for GS140 systems or 7 (CPU, I/O, and memory) for GS60E systems.
3
Configuration depends on number of I/O hoses available.
4
The maximum is as many as you need, based on the number of SCSI controllers.
5
The maximum depends on the number of StorageWorks shelves in your configuration.
6
Only required to run utilities such as the RAID Configuration Utility (RCU). (On
GS140 systems, you can move one floppy between partitions, if necessary, as described in
Section 2.9. )