Installation guide

Procedure 1
Procedure
1 Overview
Following are the steps to upgrade an AlphaServer GS60 or 8200 to an AlphaServer
GS60E:
1. Prepare the site.
2. Check all materials and position the new cabinet.
3. Power down the GS60 or 8200 system.
4. Remove the modules from the GS60/8200 TLSB card cage.
5. Insert the modules in the GS60E TLSB card cage.
6. Move devices from the storage drawer.
7. Move PCI modules from the PCI shelves.
8. Move StorageWorks devices.
9. Power up and verify the system.