Installation guide

16 Upgrade Manual
8 Move PCI Modules from the PCI Shelves
Slide out one PCI shelf at a time and remove modules for transfer to the new
cabinet.
Figure 9 Removing PCI Modules from the GS60/8200 System
BX-0450G-96
Front
1
2
4
Move the contents of one PCI card cage at a time. This makes it easier to maintain
the KFTHA hose number connections, to eliminate device reconfiguration.
Likewise, transfer the I/O devices connected to the adapters from one PCI card cage
at the same time.
1. Disconnect the power cables,
➊ in Figure 9, the I/O hose cable, and any other
cables that prevent the PCI shelf from being pulled out. Keep the hose cable
with the adapters you remove from the shelf, so that when you transfer the