Installation guide

Procedure 7
Already installed in the new cabinet are the following:
•
TLSB card cage
•
CD-ROM drive
•
Operator control panel
•
CCL panel
•
One StorageWorks shelf
•
One PCI shelf
•
Three power supplies
The following items need to be removed from your existing cabinet and installed in
the new cabinet:
•
Disk or tape drives and the StorageWorks power supply from the storage drawer
•
I/O, memory, and terminator modules from the TLSB card cage; and CPU
module for the 8200 to GS60E upgrade
•
Second PCI shelf
•
Second StorageWorks shelf
Tools
Small and large flathead screwdrivers
Small and large Phillips head screwdrivers
Antistatic bags
One for each TLSB and PCI module
WARNING: At least two people are required to remove the cabinet from the pallet.
Serious injury may result if the cabinet is improperly handled or
proper safety conditions are not met.
Unpack the new cabinet and move it into position. Save the packing box for the
return of the old cabinet.