Service manual

Configuration Rules 2-3
Table 2–1 lists the minimum requirements and maximum restrictions for three
logical partitions; Table 2–2, for two partitions.
Table 2–2 Requirements for a Two-Partition System
Partition 0 Partition 1
Min Max Min Max
CPU modules
1
1 5² 1 5²
Memory module
size
512 Mbyte 4 Gbyte 512 Mbyte 4 Gbyte
Memory
modules
2
1515
I/O modules² 1 2 1 2
DWLPB
3
1818
KFE72-EA 0 1 N/A N/A
KFE72-DA N/A N/A 1 1
BA35x
4
1 See footnote 4 1 See footnote 4
Disk Drives
5
2 See footnote 5 See footnote 5
RRD4x CD-
ROMs
1 N/A 1 N/A
Floppy
6
1
Logical partitions support KN7CG (GS140) processors only.
2
The total number of modules connected to the TLSB must not exceed 9 (CPU, I/O, and
memory).
3
Configuration depends on number of I/O hoses available.
4
The maximum is as many as you need, based on the number of SCSI controllers.
5
The maximum depends on the number of StorageWorks shelves in your configuration.
6
Only required to run utilities such as the RAID Configuration Utility (RCU). (You can
move one floppy between partitions, if necessary, as described in Section 2.9.)