Technical information

FRU Removal and Replacement 8-37
Removing a 5.25-Inch Removable Media Device
You must shut the system down before adding or replacing a removable media
device.
4. Remove the cover to the PCI card cage.
5. Remove and set aside the four screws
➊ that secure the removable media
cage.
6. Unplug the signal cable
➋ and power cable ➌ from all devices except the
floppy.
7. Remove the cage.
8. Unplug the signal cable and power cable from the floppy.
9. Remove the four screws
➍ that secure the device and set aside the screws.
Slide the device out of the storage slot.
NOTE: When installing a removable media device, remove the blank bezel from
the next available slot. For installation instructions, see the Compaq
AlphaServer ES40 Owner’s Guide.
For information on installing disk cages, see the Compaq AlphaServer ES40
Release Notes.