Technical information

SRM Console Diagnostics 4-41
4.16 nettest
The nettest command tests the network ports using MOP loopback.
Typically nettest is run from the built-in console script. Advanced
users may want to use the specific options and environment variables
described here.
Example 4–18 nettest
P00>>> nettest ei* ➊
P00>>> nettest -mode in ew* ➋
P00>>> nettest -mode ex -w 10 e* ➌
➊ Internal loopback test on port ei*0
➋ Internal loopback test on ports ewa0/ewb0
➌ External loopback test on port eia0 or ewa0; wait 10 seconds between tests