Specifications

Index-5
PCI, 5-30, 5-31
Snoop mode, 4-7
Soft bypass mode, 4-7
Specifications, 8-2
SRM console, 2-13
device naming, 2-26
power-up display, 2-6
security, 2-29
SRM console commands
crash, 7-22
show boot*, 2-19
show config, 2-20
show device, 2-26
show error, 7-19
show fru, 7-16
show memory, 2-27
show power, 7-20
test, 7-14
SRM diagnostics, 7-12
SRM environment variables, setting, 2-28
SROM
error messages, 7-11
power-up display, 2-4, 2-5
power-up messages, 2-3
Startup screens, AlphaBIOS, 2-10
status command (RMC), 4-16
Storage
hard drive, 1-17
removable media, 1-16
System board, 1-10
System chassis
components, 1-3
System diagnostics, 7-2
System enclosures, 1-2
T
Terminal setup (RMC), 4-9
test command (SRM), 7-14
Through mode (RMC), 4-5
Tools for installation, 5-1
Troubleshooting
boot problems, 7-28
categories of problems, 7-24
errors reported by operating system, 7-29
network problems, 7-30
option card problems, 7-30
PCI bus problems, 7-31
PCI parity errors, 7-30
power problems, 7-25
problems getting to console mode, 7-26
problems reported by console, 7-27
RMC, 4-31
system diagnostics, 7-2
test command, 7-14
Windows NT hard disk, 7-32
with console event log, 7-12
U
UART ports, 4-5
UNIX
booting, 3-8
booting from SCSI disk, 3-8
booting over the network, 3-10
installing, 3-12
text-based installation display, 3-12
Updating firmware, 6-1
User interfaces, 2-12
Utilities
running from serial terminal, 2-44
running from VGA monitor, 2-41
Utilities, AlphaBIOS, 2-40
V
VGA console tests, 7-15
W
Windows NT
booting, 3-20
installing, 3-22, 3-23
troubleshooting hard disk, 7-32