Specifications

Troubleshooting 7-33
Table 7–11 Troubleshooting the System Hard Disk (Continued)
Error Message Possible Cause Corrective Action
“No hard drives
were found
connected to your
computer”
No hard disk installed. Install hard disk.
Cable not connected to
either the disk or
controller.
Check the cable connections to
ensure that cable connectors
are fully seated.
Cable not connected to
either the disk or
controller.
Check the cable connections to
ensure that cable connectors
are fully seated.
No power to drive. Check cable connections. If
problem persists, try
connecting the drive to a
different power connector.
Disk drive
malfunction.
Try replacing the drive with a
drive known to be good. If
problem persists, hard drive
is defective. Contact your
service provider.
“Perform an
express disk
setup?”
Hard disk 0 does not
have any partitions
defined.
Perform an express disk setup
to automatically create
default disk partition
arrangement on hard disk 0.