Specifications

Configuring and Installing Components 5-29
8.
Secure the DIMM with the clips
➌ on the MMB slot.
9.
Reinstall the MMB.
10.
Replace the system card cage cover and enclosure covers.
11.
Reconnect the power cords.
Verification — SRM Console
1. Turn on power to the system.
2. During power-up, observe the screen display for memory. The display
shows how much memory is in each array.
3. Issue the show memory command to display the total amount of memory
in the system.
Verification — AlphaBIOS Console
1.
Start AlphaBIOS Setup, select Display System Configuration, and press
Enter.
2.
Using the arrow keys, select Memory Configuration to display the new
memory.