Specifications

Configuring and Installing Components 5-3
To Remove Enclosure Panels from a Tower
The enclosure panels are secured by captive screws.
1. Remove the front door.
2. To remove the top panel, loosen the top left and top right screws
➊. Slide
the top panel back and lift it off the system.
3. To remove the left panel, loosen the screw
➋ at the top and the screw ➌ at
the bottom. Slide the panel back and then tip it outward. Lift it off the
system.
4. Go to Section 5.2 for instructions on removing covers from the system
chassis.