Specifications

4-22 Compaq AlphaServer ES40 Owner’s Guide
4.6.5 Configuring Remote Dial-In
Before you can dial in through the RMC modem port or enable the
system to call out in response to system alerts, you must configure RMC
for remote dial-in.
Connect your modem to the 9-pin modem port and turn it on. Enter the RMC
from either the local serial terminal or the local VGA monitor to set up the
parameters.
Example 4–1 Dial-In Configuration
RMC> set password ➊
RMC Password: ****
Verification: ****
RMC> set init
➋
Init String: AT&F0E0V0X0S0=2
RMC> enable remote
➌
RMC> status ➍
.
.
Remote Access: Enabled
.
.
.
NOTE: The following modems require the initialization strings shown here.
For other modems, see your modem documentation.
Modem Initialization String
Motorola 3400 Lifestyle 28.8 AT&F0E0V0X0S0=2
AT &T Dataport 14.4/FAX AT&F0E0V0X0S0=2
Hayes Smartmodem Optima 288
V-34/V.FC + FAX
AT&FE0V0X0S0=2