User`s guide

4-10 AlphaServer DS20 User’s Guide
Example 4–3 Show Device Command
P00>>> show device
dkc0.0.0.9.0 DKC0 RZ1DB-BA LYG0
dkc100.1.0.9.0 DKC100 RZ1CB-CA LYJ0
dkc200.2.0.9.0 DKC200 RZ1CB-CA LYJ0
dkc300.3.0.9.0 DKC300 RZ1CB-CA LYJ0
dkc500.5.0.9.0 DKC500 RRD47 1337
dva0.0.0.0.0 DVA0
ewa0.0.0.8.1 EWA0 00-00-F8-00-0E-3B
pkc0.7.0.9.0 PKC0 SCSI Bus ID 7 5.54
P00>>>
The show device command displays status for devices and controllers in the system:
SCSI and MSCP devices, the internal floppy drive, and the network. The syntax is:
show device
[controller_name]
controller_name The controller name or abbreviation. When abbreviations or
wildcards are used, all controllers that match the type are
displayed. If no name is given, the display is a list of all
devices and controllers in the system.
An example of a device name is dka200.2.0.7.1. Table 4-4 shows the interpretation of
this device name.
.