User`s guide

SRM Console 4-9
Bus 00 Slot 05/3: Cypress 82C693 USB
Bus 00 Slot 06/0: Adaptec AIC-7895
Bus 00 Slot 06/1: Adaptec AIC-7895
Bus 00 Slot 08: 00E31091
Bus 00 Slot 09: Cirrus CL-GD5430
PCI Hose 01
Bus 00 Slot 07: DECchip 21152-AA
Bridge to Bus 2,
PCI
Bus 02 Slot 00: NCR 53C875
pka0.7.0.2000.1 SCSI Bus ID 7
dka0.0.0.2000.1 RZ1CB-CS
Bus 02 Slot 01: NCR 53C875
pkb0.7.0.2001.1 SCSI Bus ID 7
dkb500.5.0.2001.1 RRD47
Bus 02 Slot 02: DE500-AA Network Controller
ewa0.0.0.2002.1 00-06-2B-00-13-47
ISA
Slot Device Name Type Enabled BaseAddr IRQ
DMA
0
0 MOUSE Embedded Yes 60 12
1 KBD Embedded Yes 60 1
2 COM1 Embedded Yes 3f8 4
3 COM2 Embedded Yes 2f8 3
4 LPT1 Embedded Yes 3bc 7
5 FLOPPY Embedded Yes 3f0 6 2
P00>>>
The show config command displays a list of devices found on the system interconnect
and I/O buses. This is the configuration at the most recent initialization. The syntax is:
show config
Example 4–2 Show CPU Command
P00>>> show cpu
Primary CPU: 00
Active CPUs: 00 01
Configured CPUs: 00 01
SROM Revision: X1.82 X1.82
P00>>>
The show cpu command displays the status of each CPU. The syntax is:
show cpu