User`s guide

3-10 AlphaServer DS20 User’s Guide
3.4 Installing DIGITAL UNIX
DIGITAL UNIX is installed from the CD-ROM. Refer to the documentation
shipped with the CD-ROM for installation instructions.
Example 3–4 Installing DIGITAL UNIX
P00>>> show device
dka0.0.0.7.1 DKA0 RZ1DB-BA LYG0
dka100.1.0.7.1 DKA100 RZ1CB-CA LYJ0
dka200.2.0.7.1 DKA200 RZ1CB-CA LYJ0
dka300.3.0.7.1 DKA300 RZ1CB-CA LYJ0
dka500.5.0.7.1 DKA500 RRD47 1337
➊
dva0.0.0.0.0 DVA0
ewa0.0.0.8.1 EWA0 00-00-F8-00-0E-3B
pka0.7.0.7.1 PKA0 SCSI Bus ID 7 5.54
P00>>>
P00>>> boot dka500
➊
(boot dka500.5.0.7.1 -flags A)
block 0 of dka500.5.0.7.1 is a valid boot block
reading 16 blocks from dka500.5.0.7.1
bootstrap code read in
base = 1ee000, image_start = 0, image_bytes = 2000
initializing HWRPB at 2000
initializing page table at 1fff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
DIGITAL UNIX boot - Thu Jul 16 16:59:31 EDT 1998
Loading vmunix ...
.
.
.
INIT: SINGLE-USER MODE
Initializing system for DIGITAL UNIX installation. Please wait...
*** Performing CDROM Installation
Loading installation process and scanning system hardware.
The “ Welcome to the DIGITAL UNIX Installation Procedure” appears.
➋
Continued on next page