User`s guide

Installing Components 7-13
Option Card Installation
1. Shut down the operating system and power down the system.
2. Remove the top cover and left side panel.
3. Select the I/O slot you wish to use and remove the screw that secures the slot
cover to the chassis.
4. Install the option card by pressing it into the connector on the system board.
5. Secure the option card with the screw you removed from the slot cover.
Verification - DIGITAL UNIX and OpenVMS Systems
• Issue the SRM commands show configuration and show device to determine
that the new option is listed.
Verification - Windows NT Systems
1. Start AlphaBIOS Setup, select Display System Configuration, and press Enter.
2. Using the arrow keys, select PCI Configuration to determine that the new
option is listed.
Figure 7–9 PCI/ISA Card Installation
Slot Cover
Screws
Option Card
IP00225