User`s guide

SRM Console 4-43
4.15 Initializing the System
The initialize command resets the system and executes the power-up tests.
Example 4–27 Initialize Command
P00>>> init
Initializing...
1408 Meg of system memory
probing hose 1, PCI
probing PCI-to-PCI bridge, bus 2
bus 0, slot 7 -- pka -- QLogic ISP1040
bus 2, slot 0 -- pkb -- NCR 53C875
bus 2, slot 1 -- pkc -- NCR 53C875
bus 2, slot 2 -- ewa -- DE500-AA Network Controller
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
bus 0, slot 5, function 1 -- dqa -- Cypress 82C693 IDE
bus 0, slot 5, function 2 -- dqb -- Cypress 82C693 IDE
bus 0, slot 5, function 3 -- usba -- Cypress 82C693 USB
bus 0, slot 6, function 0 -- pkd -- Adaptec AIC-7895
bus 0, slot 6, function 1 -- pke -- Adaptec AIC-7895
bus 0, slot 7 -- vga -- DEC PowerStorm
bus 0, slot 8 -- pua -- DEC KFPSA
Testing the System
Testing the Disks (read only)
Testing the Network
System Temperature is 27 degrees C
CPU 0 Alpha 21264-4 500 MHz SROM Revision: V1.82
CPU 1 Alpha 21264-4 500 MHz SROM Revision: V1.82
TIG Rev 4.14
Arbiter Rev 2.10 (0x1)
Array # Size Base Addr
------- ---------- ---------
0 512 MB 000000000
1 512 MB 020000000
2 128 MB 050000000
3 256 MB 040000000