User`s guide

4-34 AlphaServer DS20 User’s Guide
Example 4–20 Lfu Command (Continued)
UPD> list
Device Current Revision Filename Update Revision
Fsb 3.1-x fsb_fw 3.x
Nt 5.68 nt_fw 5.xx
Pkx0 A11 kzpsa_fw A11
Srm 5.4-x srm_fw 5.4-xx
Pua A214 cipca_fw A2xx
UPD> update *
WARNING: updates may take several minutes to complete for each device.
Confirm update on: AlphaBIOS [Y/(N)] y
DO NOT ABORT!
AlphaBIOS Updating to V6.40-1... Verifying V6.40-1... PASSED.
Confirm update on: srmflash [Y/(N)] y
DO NOT ABORT!
srmflash Updating to V6.0-3... Verifying V6.0-3... PASSED.
UPD> exit
The lfu command starts the Loadable Firmware Update (LFU) Utility. The syntax is:
lfu
NOTE: If the system has been shut down from a booted program (most commonly, the
operating system) or in some other way halted back to the SRM console, the
system must be reset before running LFU.
See Chapter 3 for more information about LFU.