System information

4-18
AlphaServer 800 Service Guide
status
The status command displays the current state of the server’s sensors, as well as the
current escape sequence and alarm information.
Example:
RCM> status
PLATFORM STATUS:
Firmware Revision: V1.0
Server Power: ON
Fanstate: OK
System Halt: Deasserted
Temperature: 29.0 C (warnings at 46 C, power-off at 52 C)
RCM Power Control: ON
Escape sequence: ^[^[RCM
Remote Access: Enabled and connected
Alert Enable: Disabled
Alert Pending: NO
Init String: At&f0e0v0x0s0=2
Dial String: atxdt815085551212
Alert String: ,,,,,,,5085551234#;
Modem and COM1 baud: 9600
Last Alert:
Watchdog Timer: 60 seconds
Autoreboot : ON
RCM>