System information

Server Management Console
4-17
Example:
RCM> set init
init> at&f0e0v0x0s0=2
RCM>
set password
The set password command allows the user to change the password that is prompted
at the beginning of a modem session. The password is stored in nonvolatile memory.
The maximum password length is 14 characters. The password is not echoed on the
user’s terminal. The password must be set before access through the modem can be
enabled.
Example:
RCM> set pass
new pass> **************
RCM>
set wdt
The set wdt command sets the time-out period for the system watchdog timer.
Allowable values are:
0 (disabled)
1 (10 seconds)
2 (20 seconds)
.
.
.
9 (90 seconds)
Example:
RCM> set wdt
time (0-9 tens of seconds)> 3
RCM>