System information

Server Management Console
4-13
power off
The power off command is the equivalent of turning off the system power from the
operator control panel. If the system is already powered off this command will have
no effect. The system can be powered back on by either issuing a power on
command or by toggling the power button on the system front panel.
Example:
RCM>power off
RCM>
power on
The power on command is the equivalent of turning on the system power from the
operator control panel. If the system is already powered on or if the system is
powered off through the system power button, this command has no effect. After
executing the power on command from the RMC monitor, the user is switched back
to the server’s COM1 port.
Example:
RCM>power on
Returning to COM port.
quit
The quit command is used to exit console monitor mode and return to pass-through
mode.
Example:
RCM>quit
Returning to COM port.