System information

4-12
AlphaServer 800 Service Guide
halt out
The halt out command is the equivalent of setting the Halt button on the server front
panel to the “out” position. After executing the halt out command, the user is
switched from the RMC monitor to the server’s COM1 port. Note that a local
operator physically placing the front panel Halt button to the “In” position takes
precedence over the setting of this command.
Example:
RCM>halt out
Returning to COM port.
hangup
The hangup command terminates the modem session. Once issued, the user will no
longer be connected to the server.
Example:
RCM>hangup
RCM>
help or ?
The help or ? command displays the command set.
Example:
RCM>help
clear {alert, port}
disable {alert, reboot, remote}
enable {alert, reboot, remote}
halt {in, out}
hangup
help or ?
power {off, on}
quit
reset
send alert
set {alert, baud, dial, escape, init, password, wdt}
status