System information

6-38
AlphaServer 800 Service Guide
Table 6-4 Serial Line Keyboard Commands
Graphics Line Commands Serial Line Commands
F1 CTRL +A
F2 CTRL +B
F3 CTRL +C
F4 CTRL +D
F5 CTRL +E
F6 CTRL +F
F7 CTRL +P
F8 CTRL +R
F9 CTRL +T
F10 CTRL +U
Insert CTRL +V
Delete CTRL +W
Backspace CTRL +H
ESC CTRL +[
6.7.5 Using a VGA Controller Other Than the Standard On-
Board VGA
When the system is configured to use a PCI- or EISA-based VGA controller instead
of the standard onboard VGA (Trio64 PCI), consider the following:
• The VGA jumper (J27) on the motherboard must be set to disable (off).
• The console environment variable should be set to graphics.
• With multiple VGA controllers, the system will direct console output to the first
controller it finds.