System information

6-26
AlphaServer 800 Service Guide
Table 6-3 Summary of Procedure for Configuring ISA Options
(continued)
Step Explanation
Examine and set required
switches to match the
displayed settings.
The "Examine Required Switches" ECU option
displays the correct switch and jumper settings that
you must physically set for each ISA option.
Although the ECU cannot detect or change the
settings of ISA boards, it uses the information from
the previous step to determine the correct settings
for these options.
Physically set the board's jumpers and switches to
match the required settings.
Save your configuration. The “Save and Exit” ECU option saves your
configuration information to the system’s
nonvolatile memory.
Return to the SRM console
(DIGITAL UNIX and
OpenVMS systems only) and
turn off the system.
Refer to step 4 of Section 6.6.2 for information
about returning to the console.
Install ISA board and turn on
the system.
Use the instructions provided with the ISA option.