System information

System Configuration and Setup
6-9
Example
>>> show device
dka100.1.0.5.0 DKA100 RZ28M-S 0021
dka200.2.0.5.0 DKA200 RZ28M-S 0526
dka400.4.0.5.0 DKA400 RRD45 1645
dkc0.0.0.2003 DKC9 RZ25 0900
dva0.0.0.1000.0 DVA0
ewa0.0.0.1001.0 EWA0 08-00-2B-3E-BC-B5
ewb0.0.0.12.0 EWB0 00-00-C0-33-E0-0D
ewc0.0.0.13.0 EWC0 08-00-2B-E6-4B-F3
pka0.7.0.5.0 PKA0 SCSI Bus ID 7 2.10
pka0.7.0.2002.0 PKB0 SCSI Bus ID 7 2.10
pka0.7.0.2003.0 PKC0 SCSI Bus ID 7 2.10
>>>
Console device name
Node name (alphanumeric, up to 6 characters)
Device type
Firmware version (if known)
6.1.4.3 show memory
The show memory command displays information for each bank of memory in the
system.
Syntax
show memory
Example
>>> show memory
64 Meg of System Memory
Bank 0 = 64 Mbytes(16 MB Per DIMM) Starting at 0x00000000
Bank 1 = No Memory Detected
>>>