Service manual

6-20 AlphaServer GS80/160/320 Service Manual
6.8 Drawer Backplane Removal and Replacement
The AC must be removed from the drawer when the system backplane is
swapped.
Figure 6– 10 Drawer Backplane Removal
PK1248
1
2
3
7
6
5
4
Removal
1. If the system is not partitioned, shut down the operating system and issue the SRM
power off command. Put the OCP switch in the Off position.
2. If the system is partitioned, from the console connected to the partition with the target
FRU, shut down the operating system and power it off using SRM power off. Note,