Service manual

5-12 AlphaServer GS80/160/320 Service Manual
5.1.5 PCI Backplane Removal and Replacement
To remove a PCI backplane, the entire PCI box must be removed from
the system.
Figure 5– 6 PCI Backplane Removal
PK1548
1
2
3
Removal
1. If the operating system in control of the PCI containing the target FRU supports hot-
swap I/O and taking the I/O resources away from it will allow it to continue to
operate, follow operating system procedures to put the local I/O riser into the hot-
swap state. See Section 4.3.1 and skip to step 4.