Service manual

Troubleshooting 3-93
Fru Chasis : -
Fru Assembly : -
Fru SubAssembly : -
Fru Slot : -
Probability : Medium |
Fru Manufacturer : Compaq |
Fru Model : Memory Module 1 |
Fru PartNumber : -
Fru SerialNumber : -
Fru FirmwareRev : -
Fru SiteLocation : -
Fru CabinetID : -
Fru Position : -
Fru Chasis : -
Fru Assembly : -
Fru SubAssembly : -
Fru Slot : -
Evidence:
Time of Event : Sat, 8 Jan 2000 11:30:38
Errorlog Entry Id : 4-346
WF660 Rule Revision : X1.2/01-10-2000
EEprom SDD written : No
As stated in the note in the full description, a single FRU cannot be called
out. Each DIMM on memory module 1 is listed with a high probability of
failure.
The memory module (carrier) is given a medium probability of failure.
The error log entry ID upon which this problem found report is based is 4-
346. The importance of this ID is that it enables you to look at the specific
error log entry and perhaps gain more information that will help you
identify the failing FRU.
Some failures, error halts, faults, console hardware errors, and fatal
environment errors (680 machine checks) get written into the console
EEPROM. This error is not one of those.