Service manual

3-62 AlphaServer GS80/160/320 Service Manual
3.7.4 Running SRM Loadable Diagnostics
Each system comes with an Alpha Systems Firmware CD-ROM. On this
CD-ROM are update firmware files, LFU, an expanded SRM console,
and diagnostics. Some of these diagnostics are run at power-up.
Example 3– 40 Booting the Firmware CD-ROM
Place the firmware CD-ROM in the master PCI box CD-ROM device.
P00>>> boot dqb0
(boot dqb0.0.0.15.12)
block 0 of dqb0.0.0.15.12 is a valid boot block
reading 1082 blocks from dqb0.0.0.15.12
bootstrap code read in
base = 3dc000, image_start = 0, image_bytes = 87400
initializing HWRPB at 2000
initializing page table at 3ffec000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
-----------------------------------------------------------------------------
[Appropriate header and text identifying the CD and its contents.]
-----------------------------------------------------------------------------
Hit <RETURN> to scroll text, or <CTRL/C> to skip text.
The default bootfile for this platform is
[GS320]gs320_v56.exe (LFU)
Hit <RETURN> at the prompt to use the default bootfile
Bootfile: [gs320]gs320_v56_load.exe
OpenVMS PALcode V1.80-1, Tru64 UNIX PALcode V1.74-1
system = QBB 0 1
QBB 0 = CPU 0 + Mem 0 + Dir + IOP + PCA 3 + GP (Hard QBB 0)
QBB 1 = CPU 0 1 2 3 + Mem 0 1 + Dir + IOP + PCA 2 3 + GP (Hard QBB 1)
micro firmware version is X5.6
.
.
.
create powerup
entering idle loop
initializing GCT/FRU at 22e000
initializing pka pkb pkc dqa dqb eia eib eic
AlphaServer Console X5.8-4690, built on May 4 2000 at 06:00:06
P00>>>