Service manual

3-26 AlphaServer GS80/160/320 Service Manual
Example 3– 12 Setting Up the Diagnostic Environment (Continued)
SCM_E0> reset
Powering ON on QBB-0
SCM_E0>
QBB0 now Testing Step-0
PSM30 SysEvent: QBB_PULSE_RESET
SysEvent Reg0: 468f
SysEvent Reg1: 33ff
Phase 0............................
PSM30 SysEvent: QBB_INIT_CD1
SysEvent Reg0: 468f
SysEvent Reg1: 33ff
QBB0 Step-1 Tested |
QBB0 Step-2 Tested |
QBB0 Step-3 Tested |
QBB0 Step-4 Tested |
QBB0 Step-5 Tested |
Phase 1 |
QBB0 Step-6 Tested |
QBB0 Step-7 Tested |
QBB0 Step-8 Tested |
QBB0 Step-9 Tested |
QBB0 Step-a Tested |
QBB0 Step-b Tested |
Phase 2 |
QBB0 Step-c Tested |
Phase 3 |
QBB0 Step-d Tested |
Phase 4 |
QBB0 now Testing Step-e... |
Power On Complete
SCM_E0> test &pc0 5
Testing. Please wait...Test(s) passed.
SCM_E0> test &pc1 7
Testing. Please wait...Test(s) passed.
SCM_E0> test &pc0 10
Testing. Please wait...Test(s) passed.
SCM_E0> test &pc0 5
Testing. Please wait...XSROM already unloaded Error node 30
(response=29)
SCM_E0> test &pc1 5
Testing. Please wait...Test(s) passed.
SCM_E0>