Service manual

3-16 AlphaServer GS80/160/320 Service Manual
3.4.4 Displaying Configuration Information
Several show commands provide system information.
Example 3– 4 Show csb
SCM_E0> show csb
CSB Type Firmware Revision FSL Revision Power State
10 PBM T04.6 (11.03/01:09) T4.2 (09.08) ON
11 PBM T04.6 (11.03/01:09) T4.2 (09.08) ON
12 PBM T04.6 (11.03/01:09) T4.2 (09.08) ON
13 PBM T04.6 (11.03/01:09) T4.2 (09.08) ON
30 PSM T04.6 (11.03/01:07) T4.2 (09.08) ON SrvSw: NORMAL
30 XSROM T04.6 (11.03/02:19)
c0 CPU0/SROM T4.2-7 ON
c1 CPU1/SROM T4.2-7 ON
c2 CPU2/SROM T4.2-7 ON
c3 CPU3/SROM T4.2-7 ON
c0 IOR0 ON
c1 IOR1 ON
31 PSM T04.6 (11.03/01:07) T4.2 (09.08) ON SrvSw: NORMAL
31 XSROM T04.6 (11.03/02:19)
c4 CPU0/SROM T4.2-7 ON
c5 CPU1/SROM T4.2-7 ON
c6 CPU2/SROM T4.2-7 ON
c7 CPU3/SROM T4.2-7 ON
c4 IOR0 ON
c5 IOR1 ON
32 PSM T04.6 (11.03/01:07) T4.2 (09.08) ON SrvSw: NORMAL
32 XSROM T04.6 (11.03/02:19)
c8 CPU0/SROM T4.2-7 ON
c9 CPU1/SROM T4.2-7 ON
c8 IOR0 ON
c9 IOR1 ON
33 PSM T04.6 (11.03/01:07) T4.0 (07.06) ON SrvSw: NORMAL
33 XSROM T04.6 (11.03/02:19)
ca CPU0/SROM T4.2-7 ON
cb CPU1/SROM T4.2-7 ON
cc IOR0 ON
cd IOR1 ON
40 HPM T04.6 (11.03/01:11) T4.2 (09.08) ON
e0 SCM MASTER T04.6 (11.03/01:13) T4.2 (09.08) ON
e1 SCM SLAVE T04.6 (11.03/01:13) T4.2 (09.08) ON Ineligible
e2 SCM SLAVE T04.6 (11.03/01:13) T4.2 (09.08) ON Ineligible
e6 SCM SLAVE T04.6 (11.03/01:13) T4.2 (09.08) ON Ineligible
SCM_E0>
Example 3–4 shows the results of the show csb command. Each node on the
console serial bus is given a node address used to target PBMs, PSMs, CPUs,
IORs, and slave SCMs when using some SCM commands. For a detailed
explanation of each column, see the AlphaServer GS80/160/320 User’s Guide or
the AlphaServer GS80/160/320 Firmware Reference Manual.