Service manual

Troubleshooting 3-15
Example 3– 3 Set Environment Variables
SCM_E0> set hp_count 3 !setting up 3 partitions
SCM_E0> set hp_qbb_mask0 03 !partition 0 two QBBs 0 and 1
SCM_E0> set hp_qbb_mask1 04 !partition 1 with one QBB, 2
SCM_E0> set hp_qbb_mask2 08 !partition 2 with one QBB, 3
SCM_E0>
Any of these environment variables can be set using the SCM set command. In
Example 3–3 the set command is used to define 3 partitions. The hard
partition count (hp_count) is set to 3 and each partition is set up on QBB
boundaries by the hard partition masks (hp_qbb_maskx). The results of these
particular set commands can be seen in Example 3–2.
For details on system environment variables, see the AlphaServer
GS80/160/320 Firmware Reference Manual.