Service manual

3-8 AlphaServer GS80/160/320 Service Manual
Table 3– 3 Fluorescent Display Messages
Display Message Description
AlphaServer GS-xxx
Identifies the AlphaServer as a GS-80, GS-160, or
a GS-320. If the OCP_TEXT environment variable
is empty, this line appears, otherwise the value of
the OCP_TEXT environment variable is displayed.
Cpu- Mem- Pci-
Indicates the number of good CPUs, memory
arrays, and PCI buses attached to the system.
Keyswitch-
ON/OFF/“ON/SECURE”
Indicates the state of the keyswitch.
Faulty Keyswitch
Indicates that the keyswitch is not working or is
not connected to the SCM.
Power ON
The system is on.
ON - Failure
The system failed during power-up. See the
console display to determine why.
Powering/pwr OFF
partition- x
The system is powering on or off a particular
partition.
PwrOn Phase x Step y
On a partition by partition basis, this line
describes what power-up diagnostics are presently
running.
“Marks” Indicates that power-up flow is in progress.
Power Transition
OFF/Failed
Indicates that the system is in the process of going
from an On state to an Off state, or has failed in
the process of going from an Off state to an On
state.
QBB Power On/Off CPUx A particular CPU is powering on or off.
QBB Power On/Off IOR x A particular local I/O riser is powering on or off.