Service manual

2-22 AlphaServer GS80/160/320 Service Manual
2.6 System Turned On
Once the OCP switch is attended by the SCM firmware, the system can
be turned on by the switch.
Example 2– 2 SCM Power-Up Display (OCP On)
SCM_E0> OCP switch is now active and operational
SCM_E0>
SCM_E0> Powering on PCI Box 0 |
Powering on PCI Box 1 |
~I~ Testing OCP Switch- passed
QBB-0 Powering ON |
Power ON Phase INIT |
QBB-1 Powering ON |
QBB-2 Powering ON |
QBB-3 Powering ON |
SCM_E0>
QBB2 now Testing Step-0 |
QBB3 now Testing Step-0 |
QBB0 now Testing Step-0 |
QBB1 now Testing Step-0 |
~I~ SCMe1 non-csb member while it tests & initializes its Shared RAM
SCM_E0> .
~I~ QBB0/PSM30 SysEvnt: QBB_INIT_CD1 Reg0:7AB3 Reg1:35FF (test-0) |
(fmask/fts:8f) |
|
~I~ QBB2/PSM32 SysEvent: QBB_INIT_CD1 Reg0:768F Reg1:0FFF (test-0) |
(fmask/fts:8f) |
|
~I~ QBB1/PSM31 SysEvent: QBB_INIT_CD1 Reg0:7AB3 Reg1:3FFF (test-0) |
(fmask/fts:8f) |
|
~I~ QBB3/PSM33 SysEvent: QBB_INIT_CD1 Reg0:768F Reg1:0FFF (test-0) |
(fmask/fts:8f) |
Testing SIO Shared RAM(please wait) |
|
Initializing shared ram |
Shared RAM Initialized |
Powering ON H-Switch |
SCM_E0> |
~I~ HSW4/HPM40 SysEvent: HS_INIT_CD1 Reg0:000F Reg1:D581 |