Installation guide

Consolidating Multi-SMC/AS Configurations to One SMC 7-11
1. Cable the terminal server being transferred to the network hub. Connect
one end of a BN25G cable (17-03212-05) to the management channel
connector on the terminal server (see
in Figure 7–10).
2. Connect the other end of the cable to a port on the network hub (see Figure
7–11 ). Use any port except port 1.
Figure 7–11 Ports on an 8-Port Network Hub
...
LEDs
Electrical outlet
Port 2
Port 1
8
Front view Rear view
MR0203-01