Installation guide

7-2 SMC Installation Guide

7.1 Choose the SMC to Remain and Add Hub

Pick the SMC to remain in the configuration (usually the one with the

most connections/partitions), and if it has a terminal server, connect it

to the network hub. Then cable the hub to the remaining SMC. (If the

SMC does not have a terminal server, cable the AlphaServer to a new

terminal server, the terminal server to the new hub, and the hub to the

SMC.)

7.1.1 Cable the AlphaServer System to the Terminal Server

(If Necessary) and the Terminal Server to the Hub

If there is no terminal server on the selected SMC’s system, connect

one to the AlphaServer system. Then connect the terminal server to

the network hub.

Figure 7–2 Terminal Server Management Channel Connector

PK-1769-00