Installation guide

Adding an AS System to Single AS System with SMC Already Installed 5-11
Figure 5–8 Ports on an 8-port Network Hub
...
LEDs
Electrical outlet
Port 2
Port 1
8
Front view Rear view
MR0203-01
1. Connect one end of the BN25G cable (17–03212–05) to the management
channel connector on the terminal server (
in Figure 5–7).
2. Connect the other end of the cable to a port on the network hub. (See Figure
5–8 for an example of an 8-port network hub – yours may be different.)